Text Box: Product Detail

Power line filters protect and facilitate power and secure communications for shielded rooms and buildings.

Product Summary

· Low cost

· Manufactured and tested to the applicable portions of Mil - F- 15733

· Hermetically sealed with welded and soldered seams for shielding effectiveness

· Bleeder resistors incorporated to eliminate potential shock hazard

· Two discrete circuits provided in the same case for 5 A through 100 A configurations (Other current ratings are available)

· Threaded steel penetration included with filter case

· Factory pre-wired lead through pipe penetration included

· Removable input cover for easy access to terminal

· Electro - Plated over cold rolled steel filter case

· Mounting tabs provided for easy wall mounting

· Double knock outs provided on filter case input

· Power factor correction coils available 400 Hz

Power Filters–
Order Information

Last Updated: 1002241200

Copyright ©2010 Genisco Filter Corp.           5466 Complex St, Ste 207, San Diego, CA 92123       Phone: (858) 565-7405

Special Features
Functional Characteristics

· Insertion Loss:
> 100 dB from 14 kHz through 10 GHz when measured in accordance with Mil - STD - 220A test procedure with extended range buffer networks

· Voltage Ratings:
120 / 208 Vac (50/60,400 Hz) 277 / 480 Vac (50/60 Hz)

· Voltage Drop:
2% at full rated AC (UPF) load

· Harmonic Distortion:
4% max at full rated AC(UPF) load

· Temperature Rating:
Per MIL - F - 15733 and UL1283

· Current Overload:
140% maximum current rating per MIL - F - 15733

· RF Radiation:
100 dB isolation shielding effectiveness

· Dielectric Withstanding:
2200 Vdc per MIL - F - 15733 and UL1283

· Insulation Resistance:
MIL - F - 15733
(w/o discharge ckts)

· AC Current Ratings:
5A To 250A

GF57915

· MIL - F - 15733
General specification for filters, military

· MIL - STD -202
Test methods for component parts, military

· MIL - STD - 220A
Test method of insertion loss, military

· MIL - STD -285
Test method of shielding effectiveness

· NFPA 70 - 1987
National Electrical Code, standards

Applicable Specifications

Genisco Filter Corp

The Source For EMI Filters

Text Box: Return To Product List